how I loaded the X-1 step by step

[@night]

from @night

how I loaded the X-1 step by step

download this folder with latest bin in it.
located here install it to desktop
x-1 setup folder
sub/folder x-manual
sub/folder x-loader =
sub/folder ABS = factry file, 1.13 abs
sub/folder BIN = 1.18bin

Take a usb stick and use it . from the ABS sub/folder load 1.13abs onto xstick. from the BIN sub/folder load 1.17bin on to xstick.
Hook up all cables to your xfactor. Turn on tv and X-1. After it loads screen/comes up. Insert usb stick into usb slot.

Arrow down to TOOLs. Hit OK.input 0000. Arrow down 2 time to "load from USB". hit OK
It will say Upgrade mode=all codes.
arrow down 1 time
It will say Upgrade file version 113P-1.ABS
arrow down 1 time
It will say
Start. hit OK
Do not power down. Do not touch USB. Do not touch box.
It will reboot it self.

it will say ugrade mode right arrow it to <MAIN FILE>
arrow down
It will say Upgrade file version < V1.X11 2.bin>
make sure it's latest bin
arrow down
start
Do not power down. Do not touch USB. Do not touch box.
Let it reboot. after reboot. take out usb.
>menu>cas>advanced>>autoroll on
setup antenna for what satellite you want to watch

in menu make sure auto roll is on
leave it on scrambeled channel Do not do any thing else
let it autroll can take up to 5 minutes

>>>>>>>>ENJOY<<<<<<<<<

you may C&P this as long as arthur is credited

@ this time time it will not let me upload files
i had instuctions in english and spanish located in the manual sub folder

[Cougar830]

Nice Post. Merry Christmas

Great post thanks.

[@night]

---DO NOT USE LOADER. to load any file to the Xfactor
only way to load is by the USB. whey are working on a new rs232 loader.
there is a problem the loader does not see the bin.