Conaxsat he new softwar for cnx duo the new software for the cnx duo does not work

[rwilli1]

the new softwar for cnx duo the new software for the cnx duo does not work yet
If you have the nano2 with the 1.18 file just load back the 1.17 or the 1.15 file and you will be up again.There are reports that the 1.18 file isn't working at this time.

[bluepenguin]

The new software doesn't work on Mini/Duo/Trio/Nano.
In fact it rendered my dongle for my mini useless won't take previous file or connect and get an ip.

[rajuB4U]

c&p

Ok guys here are the instructions on how to get back tv on the mini
Step by step instructions
1. Do a factory default (remember when you do this it will erase (delete) your settings, so make sure you take pictures or write down the settings)
2. Install the the UNO file for mini MIN_03.48.zip select the (boot loader upgrade)
3. Rescan your channels go to Diseqc Switch (Select your sats ) exit the settings so the unit will save the changes).
4. Last and this is important step install the dongle and use the IX-X00-E_A2.0.8_T1217.DGL from Sept. 21 09
That should do it folks let me know if this works for Nano1, trio and duo
And for those complaining remember this a hobby and as such you will experience problems doing it.
Stop complaining and if you don't want troubleshooting the units then by all means go and get DT or DN subscription so you don't have to worry about it

[rajuB4U]

c&p

There are problems with some on new dongle files and server needs maintenance today. Mini, Duo and Trio users still having troubles on new files but working on older version

...

[rajuB4U]

It should be up now.