FTA Missing PPV 455

1oath · #1 04-14-2009

Hey guys, need your help again. I can't seem to get channel 455, or any channels on tp 12355.

I've searched goolge for the answer but turned up nothing that helped. The last thing I tried was scanning 12335 but it didn't work. The quality and the strengh are good on that tp

CW 700, Bell Dish dual LNB

**..razz..** · #2 04-15-2009

Hello 1oath,
That channel usually needs to be active to receive it. So the next time you see a program on it, Scan it. And you should be able to test it. Not sure why you cant get any other channels on the tp. Maybe one of our other staff has a better answer on that one. Take care.

**williejoe** · #3 04-24-2009

It's better that you give us the antenna settings of your box so that we can recommend of you're going to do, be sure that you have the satellite of 119W (E**7) to have the Channel 455..

1oath · #4 04-26-2009

I'm still new to all this so bare with me.
I'm using a Bell dish with 2 lnb, settings below are the same for both 110 and 119. Above the quality meter it says "found echo 6,8" even with 119 selected. Should it not say found 119? Diseqc set to auto since when I try to set 119 to 1 or 2 I lose all signal. In the channel manager some of the channels to say echo 119, but most are 110.

LNB Freq. : 11250
LNB Type : Normal
22 kHz : OFF
Diseqc Number : Auto
Legacy SW : OFF
Motorised System : OFF

**Cougar830** · #5 04-26-2009

LNB Freq has to be 11250 for 110 For 119 change your freq to 11239 to see you sig and quality. The reason it doesn't change for you there is nothing on 11250 on the 119 sat.