review on the Captain 8000HD

[evd]

Here is my prelim review on the Captain 8000HD


Once received unit was well packed and came with the usual, except this one also had component cables, which I will not use as I want to test the HDMI cables


First thing I did was take the latest release file and loaded it in on my CPU, Latest release at the time , then proceeded to unrar the file, then I renamed the file as stated, (FOR USB DOWNLOAD
Please first rename file to APP_7710_down before you save it on your USB stick.). I then dragged the flash file to my USB memory stick. then connected all coax and HDMI cables to the receiver and HD TV. I then proceeded to to flash the new bin to the receiver via USB, once the USB drive was installed the receiver recognized it right away, clicked on file and started the flashing process, took about a minute from start to finish including the reboot, then the receiver said Hi Neusat, LOL which was an inside joke I was told. I then proceeded to set my Dish settings, 119 110 91 82, it ask the usual language, time, location, etc... , then it ask if I wanted the one touch setup, so by fta mistake I clicked on yes. realizing I had not check marked my Sats so it started setting and searching for all Sat settings, so I tried to exit and cancel and it would not allow , so I turned the unit off from the rear and decide to try the process again. this time made sure only my 4 Sats were check marked incase I wanted to try the one touch setup again down the road. I proceeded to set my 4 Sat Dish settings, quickly noticed that it seemed to have some issues with the 4x4 multi switch 22k's so proceeded to play with the disable and enable and finally got them all in. Then I did a multiple scan with network search on and it took almost 20 minutes and at times the TP numbers would not move but the freq's were moving during the scan same was for the progress bar it would stay either @ 3 or 4 %. Once finally done I set my user settings then exited and tested the receiver, dish took about 3 minutes to roll and Bev took about 5 minutes to do so. I then started checking my usual channels like HBO and PPV and of course our Bev porns also and quickly noticed that all channels did not scan in properly, so I proceeded to do another scan this time one sat at a time, then I got a much better scan. tested channel 1850 TSNHD and was very impressed with the picture and quality. You have to love that HD. I then proceeded to do more testing, played with the step button on the remote which switches from different video formats such as 1080I which is default, 720P 480P 480I, also the EPG sometimes freezes up when updating so this seems to be an issue. I have had some freexing issue and no service also. I then decided to loop out another receiver as you know most of us that test don't all have 16 lines coming in the house like Sarge does so I use the loop out on all my 3 lines that come in the house. I made the Captain the main line in and looped 2 other receivers out, all worked fine till I noticed something, as the main receiver being the Captain that receiver should not be affected by the other receivers being on but it was, quickly noticed that the Venus channels on the Captain were not coming in and showing no signal strength so I turned the other 2 receivers off from the front, and then Venus came right in, this does not happen with any other receiver I am testing here, I understand if it was not the main receiver and it was looped but thus was not the case. another thing I noticed that was annoying at times was if you were on a PPV channel and front display screen would scroll from PPV and channel 517 so the Sarge quickly noticed that by turning the long name off it turned the scrolling off. Another item that needs tweaking by the coders is the signal and quality meters they are set to low, most of my receivers are in the mid 90's and the Captain shows in th ehigh 70's so that is just a matter of tweaking there SW, also a saving of Sat settings and channel list via USB would be great and save on time when doing a factory default. Another item I noticed is that sometimes if you turn the front receiver off and back on the sound goes out you have to channel up or down to get the sound back

I will do a little more testing today and will try something else, will do a fresh scan but with network search off and see if the scan are quicker by not building a new TP list, and if it eliminates some of the inactive channels showing and also to see if it will allow the TP numbers to ascend during the scanning process along with the progress bar

Then I will proceed to setup and test the Captain Premium 7000