FTA No signal help please

[rbh]

Hello guys, my sat was working fine yesterday until today, there was no signal at all on all channels. I went into dish setting the S:0/Q:0 even i tried with different transsponder it still shows 0 signal on S/Q, any help is appreciated, thanks.

[DimeCFH]

Originally Posted by rbh

Hello guys, my sat was working fine yesterday until today, there was no signal at all on all channels. I went into dish setting the S:0/Q:0 even i tried with different transsponder it still shows 0 signal on S/Q, any help is appreciated, thanks.

Before you do anything, first have you tried a hard boot? That's turning your receiver off in the back and after 10 seconds turning it back on. If still no go, it's possible that your dish has moved. Try going back to your original settings, and then go outside and tweak your dish a little. If still no go, please come back and give us some more info. What receiver you are using, what sat/sats your aimed at, and your settings. Let us know.

[rajuB4U]

We would need son information. WHat fta model, Switch, and dish you have ?

[dannyzzz]

if you don't have Quality it means there's something wrong with your connections double check them first and as requested before please give us more info so we can try help you better.

[ecratticsr]

also check your ground as well as your connections.