FTA new to fta need help with something i find weird

twirlymaster · #1 05-09-2009

hello guys i just received yesterday my new sv 360, i have a dish pro on the roof, and i followed directions to the t i thought. i loaded the new factory bin and it took it no problem i go to dish setting and their is no echo7, or echo 8,10. i dont know why their not on the list. their are alot of others but not those 2. again im new to this but am a quick learner any help would be appreciated. thank you guys.

**TD52** · #2 05-09-2009

what have you used for a bin..the version...and also did you hit the birds and then go up and down and it will say 110 and 119...it may not say what you want to see...but untill you add the other full name bin and the updated factory bin ...like i said it may not have those name ..but it will have to settings..so look for them and if you want you can change the name to what you want

**samson** · #3 05-09-2009

What you mentioned was that you loaded the factory file-----after that you have to load the latest working bin file, then take a look at your sats & edit them if need be. The latest file for the SV 360 is in the files section re the sonicview receiver files. Should not be a problem to find---take a look in "forums". Hope that helps, Good luck.

Whoops LOl---TD52 is faster than I am----like the man said. LOL

twirlymaster · #4 05-10-2009

all i did was put the factory file 1.11 and that was it. i didint know it needs 2 files. i see echo 4 and some other ones but not those, ok so im going to reset my box, and start from scratch. so first i need to download and install the factory file then restart the box, then down load another file then i can go to the settings and find the 2 dishes? if you guys know the name of the 2 files i need that would be fantastic. their are so many files 2 choose from . thanks i know some of you guys must think im an idiot, i am when it comes to this stuff, but i was smart enough not to pay for cable.

**samson** · #5 05-10-2009

Don`t know exactly what you have elite or premier so this is what you do---go to forums, scroll down till you get to sonicview files---there you will find your factory file, your loader file and the newest working file for your particular receiver. Also if you`re still unsure about something take a look in sv discussions pertaining to your receiver. hope that helps---good luck.

**Cougar830** · #6 05-10-2009

Actually you only needed to load the latest bin. Your receiver came with the factory file already installed on it. Look into the how too section and find your receiver and follow the directions on how to do your setup.

twirlymaster · #7 05-10-2009

all i see in downloads is the latest
Sonicview SV 360 Elite Factory File V111 - March 2009

i dont see the bin file? do you guys know what its called or give me a link for it.

**dannyzzz** · #8 05-11-2009

Quote:

Originally Posted by twirlymaster

all i see in downloads is the latest
Sonicview SV 360 Elite Factory File V111 - March 2009

i dont see the bin file? do you guys know what its called or give me a link for it.

It's been over 4 months since the last time Sonicview receivers went down, actually current working file wasn't in the file section must have been deleted by the system due the date of the file back in January so i had to upload it again.

file can be found here: Sonicview SV360 Elite_V0186P